May 21, 2024

How to measure for Drapery Curtains?

The first step in measuring for custom drapery albuquerque nm is figuring out what length you need. To do that, measure the height of your window (from top to bottom), and then divide by two. This is how long your drapes should be, from top hem to bottom hem. If you want drapes that hang down, add another 12 inches or so and plan on attaching a rod at this point. Most windows will accommodate this length easily. The next step is figuring out what width you need for your draperies. Measure the width of your window, then add 10 inches (to account for all those folds and gatherings). Lastly, figure out how much fabric you’re going to need by multiplying these two measurements together (length x width). Divide the result by 39 (.5 yards) if you’re buying standard-width fabrics, or multiply it by .945 (.1 yards) if you have purchased specialty widths.

Let’s take an example: 

If we have a 36-wide window with 96 vertical spaces, we would measure our curtains as follows: 96 divided by 2 equals 48, which means our curtain panels should be 48. Then we would add an extra 12 to make them 60, which would leave us with just enough room on either side for our curtain rods (plus a little extra). And lastly, since we are using standard width fabrics (.5 yards each), we will need 24 yards of fabric altogether – because 48×36 = 1472 square feet.

Drawbacks of Drapery Curtains

The drawbacks of Drapery curtains are that they can be heavy, making it difficult to open and close them. They also require a rod or pole to hang them on. Draperies are often lined with fabric with a decorative pattern or design, which can make it difficult or impossible to see out of the window from the inside if you live in an apartment. If you have pets, they may be tempted to climb the curtains because they don’t think anything is blocking their way. Finally, draperies block out light from outside your home, leading many people who use them for their windows in bedrooms or living rooms to complain about feeling airless.

How to clean Drapery Curtains

custom drapery albuquerque nm curtains are delicate, and cleaning them can be a bit of a challenge. That’s why we’re sharing these four tried-and-true ways for cleaning draperies with you.

  1. Vacuum Cleaner Method To clean your draperies using this method, make sure that they are not wet first. If they are wet, wait until they have dried before vacuuming them so as not to damage them in any way. Once you’ve done that, take your vacuum cleaner and vacuum the back side of your draperies first before working your way down toward the front side. 
  2. Dry Cleaning Method For this method, remove the draperies from their rods first by undoing them at the top and bottom. Next, place your draperies on a dry cleaning rack made specifically for drying clothes on hangers (like these) and leave them there to air dry overnight (or for up to 24 hours). 

Continuation (six+ sentences): The next day, hang up your rods again and hang your draperies on them once more by feeding each rod through one of its sleeve pockets. 

  1. Laundry Detergent Method For this method, remove the rod(s) from each set of draperies by loosening it at the top where it connects to its hanger.